Skip to Content

Listen to the Joystiq Podcast (because your ears can't read)
AOL Tech

wiring posts

Ask Engadget HD: How do I hook up surround sound without cables running everywhere?

by Richard Lawler posted Oct 1st 2009 at 12:35PM

Sometimes a move can necessitate rethinking one's home theater setup, which was exactly the case for our friend Amani. A shift from a room with carpets to run wires underneath to hardwood floors has him wondering what the easiest and neatest way is to hook up the rear speakers:

Ok, here is my dilemma. I used to have carpet in my main area where my TV is and surround sound is. Speaker wire would run under carpet. I just got hard wood floors installed so now there will be wires all over the place for my sound. What creative options do I have to set back up my surround sound but perhaps eliminate the wires or use wireless.connection to connect my speakers. I need help because I can't have speaker wire all over my pretty new floors! Thanks

So is the best route to drill right into the walls, some kind of invisible speaker cable, or is there a good wireless speaker setup that doesn't involve falling back to a HTIB? Let us know how you solved this kind of problem and save Amani some heartache and time.

Netgear's Home Theater Internet Connection Kit spreads content on power lines

by Darren Murph posted Aug 12th 2009 at 8:41AM

Not so fond of those wireless streaming solutions? Unable to strew Ethernet cables all across your abode for fear of an SO beating? Fret not, as Netgear's now-shipping Home Theater Internet Connection Kit has you covered. The $179.99 bundle consists of an XAVB1004 Powerline AV Ethernet switch and a single Powerline AV Ethernet Adapter (XAV101) to get you started; just connect your web-ready wares to these adapters via Ethernet, and connect said adapters to your home's vast array of power outlets. It's magic, really.

[Via HotHardware]

Ultra-clean custom install leaves us ashamed of our rat's nest

by Steven Kim posted Jul 18th 2009 at 8:36PM

Clean install
As impressive as some custom installs look from the front-end, CEPro has photos of the back-end of a "masterpiece" setup that simply must be seen. If you think moving a set-top box to a remote location is excessive, you'll want to munch on some Xanax before hitting the link, because your head might a-splode. Sure, the ultra-wealthy can get the job done by cutting a nice big check, but you've got to respect this kind of fanatical attention to detail that someone mustered to both plan out and install by hand. Considering that the system has more than a dozen Crestron panels for HVAC, lighting, AV, security, water features and a train set (ultra-rich, remember?), you might even say that the effort was necessary for getting things up and running and keeping them that way.

Audiovox HDP100 HDMI-over-powerline kit tested, on sale

by Darren Murph posted Dec 5th 2008 at 10:24PM

Generally speaking, anything over powerline has received tepid reviews at best, and sure enough, Audiovox's promising HDP100 is just more of the same. The kit seeks to shuttle HDMI signals over your existing power lines within the home, but in CNET's review lair, critics found that the signal was "slightly degraded over what it expected from a true HDMI cable (i.e. perfection), showing lower resolution and some subtle choppiness, as if it was dropping frames." Still, those with smaller TVs or less demanding eyes may find this desirable over running all sorts of cabling across your floors; if we just rang your bell, you can snap the package up now for around $399 (or less on the street).

Audiovox HDP100 sends HDMI over powerline

by Steven Kim posted Oct 31st 2008 at 8:58PM

Audiovox HDP100 HD Powerlink
If you're tired of waiting to beam your HD signals across the room over thin air but still crave that tidy install devoid of snaking wires, you might want to give HDMI over powerline a try. For $400, Audiovox will hook you up with its HDP100 HD Powerlink system (apparently under the Acoustic Research brand) -- a single transmitter, receiver and accessories that will transmit HDMI and IR remote signals over the Romex already in your walls. Of course, as with all things with names ending in "over powerline," performance can vary based on things like your home's wiring, what other devices are placed on the circuit, how the HDP100 units are plugged in and maybe even the phase of the moon; but that same $400 will disappear pretty quickly if you have a pro pull some wires through the walls.

High-def audio wiring guide removes the mystery

by Darren Murph posted Oct 31st 2008 at 1:45PM


Granted, we've already shown you how to actually take advantage of Dolby TrueHD and DTS-HD, but if you're looking for a quick and dirty breakdown of what each audio codec means, what it can / can't do and how to wire things up with your current setup, Missing Remote's latest guide is for you. For starters, it hones in on Blu-ray audio format support -- quite relevant given the state of the format war these days -- and it continues on by explaining how to wire things up for superior results with S/PDIF, HDMI, analog, etc. There's even a special section dedicated to HTPC playback, which ought to help you folks not using a pre-fab deck. If you've been spinning your wheels of late in the wide world of multi-channel audio, have a look at the read link and see if things don't clear up.

NuVo Renovia delivers whole-home audio over powerline

by Darren Murph posted Aug 22nd 2008 at 8:45AM


Faults notwithstanding, powerline is still mighty scrumptious in theory. Evidently NuVo Technologies agrees, as it's cranking out what's possibly the planet's first whole-home audio system that relies on existing A/C wiring. The Renovia can deliver audio and metadata throughout the house by simply tapping into the power wires already within your walls, and in case you couldn't guess, it's using the HomePlug 1.0 specification in order to do so. The central hub has AM, FM and Sirius-ready tuners already on board, and owners can plug in a pair of iPod docks along with two analog sources to boot. In case that's still not enough to get your drool a-flowin', it'll also stream "virtually any digital content on the network via NuVo's Music Port module." There's no word just yet on an MSRP, but judging by NuVo's past, we'd assume that it'll be somewhere between grossly and obscenely overpriced.

XCM unveils Multi-Component Cable v2: console connections unite

by Darren Murph posted Jan 6th 2007 at 9:48PM

We're all about keeping things nice and well kempt, and if you're the type who's sporting a house full of consoles, you know precisely how difficult a clean wiring solution is to maintain. Helping to clear out that rat's nest of cabling is XCM -- those same folks who brought us the XFPS -- which is delivering the Multi-Component Cable v2 to simply that cord conundrum. Sporting a trio of connectors, this single device can simultaneously connect to your Xbox 360, Wii, PlayStation 3, and reportedly your dusty PS2 as well, and plugs into your TV set via component outs. As you might expect, a simple flip of the toggle switch changes the console you see on screen without you having to risk your life climbing atop the television. Currently, the device is still stuck in "preview" mode, but XCM promises to have a full list of specs and availability details ready soon, and if you can catch a video sneak peek after the jump.

Continue reading XCM unveils Multi-Component Cable v2: console connections unite





    AOL News

    Other Weblogs Inc. Network blogs you might be interested in:

    Joystiq
    Download Squad
    The Unofficial Apple Weblog (TUAW)
    BloggingStocks
    Joystiq Xbox
    Autoblog
    Big Download
    Fanhouse NFL Blog