Skip to Content

Exclusive: Rock Band Unplugged Track List
AOL Tech

digital cable tuner posts

Microsoft emancipates Digital Cable Tuners with second Media Center update today


Scant hours after the SDV tuning, DRM-relaxing firmware update for Vista and Windows 7 Digital Cable Tuner users became available, Missing Remote let us know Microsoft has come through on the other half of its CEDIA promise by pushing the Digital Cable Advisor to Media Center Extras galleries everywhere. This half should enable all Windows 7 PCs to work with the CableCard tuners, sans-OEM requirement or inconvenient hacking. Sure we could ask for more from Windows 7 Media Center, but for now Netflix and these two (in less than 100 days) will have to do.

Read - MCE: Digital Cable Advisor Tool Available Now!
Read - ATI DCT Firmware update pops up on Windows Update, DRM-free MCE recordings & are a go

ATI DCT Firmware update pops up on Windows Update, DRM-free MCE recordings & SDV are a go


Microsoft delivered the first half of two promised ATI Digital Cable Tuner-related updates as the 1.19.12.09050155 firmware update is now available from Windows Update (listed with the optional udates) that will relax the way it handles DRM on its recordings and add support for Switched Digital Video. With the new update applied, all Copy Freely-marked programing will be recorded without DRM allowing you to move it between PCs, convert it to another format or whatever you wish with ease, however as our hands on experience with the new firmware indicated you'll still need your cable provider to pass along the right bits to make it all operate properly. Still waiting in the wings is the Advisor Utility that will allow Digital Cable Tuners to work with any PC, no OEM purchase or hacking skills required.

[Thanks, Rob]

Microsoft officially delays Digital Cable Tuner firmware and Advisor Utility

ATI Digital Cable Tuner
Ever since CEDIA Windows Media Center enthusiasts have been anxiously awaiting the announced firmware update for the ATI Digital Cable Tuner and the Advisor Utility. While the firmware will finally relax the DRM on recording made with the Digital Cable Tuner and enable support for Tuning Adapters, the Advisor Utility will make it so anyone can add a Digital Cable to Tuner to their Windows 7 PC. Although a hard release date was never announced for either of these, it was fully expected that both would be available at the same time as Windows 7. Now Microsoft has posted over at The Green Button letting us know that we can stop checking as neither will be released today. To add insult to injury no new date was given, only that it would be available as soon as possible. So yeah, big time bummer for Media Center fans.

A first hand look at SDV and Copy Freely support in Windows 7 Media Center

ATI Digital Cable Tuner

If you have a ATI Digital Cable Tuner connected to your Windows Media Center then you've been waiting a long time for a firmware update. In fact, although updates were released fairly steadily during the first year of the product's life, the last update (1.17.1) was dated April 30th 2008. But this long delay has been particularly painful because this is the first update since CableLabs relaxed the DRM requirements last Summer -- it's also the very same update Microsoft has been touting since CEDIA 2008. So what took so long? We'd like to know, but one thing is for sure, CableLabs sure took its time in the approval process as the date on the firmware is May 1st 2009! Better late then never, so while you wait for the public release click through to find out what all the fuss is about.

Hauppauge to expand its offerings to include a CableCARD tuner

Hauppauge logoThe tuner company that we never seem to be able to pronounce correctly is planning on adding a digital cable tuner with CableCARD to its lineup. No word on price or availability but the initial seemly over ambitions timeframe was this year. Our friends at Geek Tonic were able to confirm the the company's plans for the new tuner, but also learned that there is little hope that the new device will make it to market before the Ceton tuner, and in fact the actual release is still undeterminable. The good news is that there will be some competition in the PC digital cable tuner market which is always a good thing, in fact at this point we wouldn't be surprised if Avermedia was the next to throw its hat into the mix.

[Via GeekTonic]

How to install a CableCARD tuner in your DIY Media Center

ATI Internal DCT

Access to premium HD on computers has eluded most for way to long, so as soon as we heard that it was finally possible for anyone to add a CableCARD tuner to just about any Media Center, we just knew we had to try it for ourselves, and more importantly, share with you exactly how to do it. This doesn't really require any hacking, or anything illegal for that matter -- we're not lawyers -- but it isn't cheap. The internal version of the ATI Digital Cable Tuner pictured above can be found new on eBay for about $195, or new from PC vendors like Cannon PC for just under $300. If that doesn't seem like a bad deal to you and you already have an HTPC up to the challenge, then you should join us on our journey to HD bliss by clicking through.

New utility makes any computer's BIOS CableCARD ready


After learning that some were having success adding ATI Digital Cable Tuners to HTPC they built themselves, we knew it was only a matter of time before it would be possible to make it work on any computer, but we have to admit we never thought it would happen this fast. The Green Button forum member DanITman posted some directions and links to everything you need to make ANY Vista or Windows 7 computer support digital cable. The hack is very simple actually, it just uses a modified version of VistaLoader to emulate a Sony OCUR compliant computer's BIOS. The real beauty is that it can easily be installed or uninstalled and if Microsoft were to black list the Sony BIOS, emulating a different BIOS would be trivial. The only potentially unworkable caveat at this point is if you are using an Dell OEM Windows PC using the OEM key, this will break your activation, but hopefully a solution for that will be discovered shortly as well.

DIY'ers successfully build their own CableCARD equipped HTPC

ATI Digital Cable Tuner
HTPC fans were devastated when it was revealed that only OEM PC builders would have the privilege of building Vista Media Center PCs with CableCARD support, but hope is here: it looks like a few members of The Green Button forum have figured out how to build their own CableCARD ready HTPC. There's two barriers to overcome, which unfortunately still make it more difficult than just picking up an internal or external ATI Digital Cable Tuner, but they're not terrible: would-be system builders just need to score an OCUR tuner product ID number and use a BIOS contains the correct OSFR table. No one's figured out how to tweak just any BIOS yet, but apparently most ASUS P5Q motherboards work fine -- so really you just need to score some used CableCARD tuners off eBay and ask the seller for the PID from their computer. Or you could throw caution to the wind and plug in the generic PID of 263DJ-2Y9YT-6X9G6-W28DB-697TF, which may or may not work. Anyone feeling brave enough to grab a new mobo and CableCARD tuner and give this a shot?

Tuning Adapters coming to Windows 7 Media Center?

Tuning adapter
Media Center fans with ATI digital cable tuners that use CableCARDs have felt pretty left out recently as all the TiVo owners have been getting their hands on Tuning Adapters, and thus access to all the SDV delivered HD channels they pay for. Well it appears there may be some good news on the horizon. We were listening to one of our favorite podcasts -- no not that one, or that one or even our own -- by Derek Flickinger who is a foremost expert on everything Media Center, and at about exactly the 40:00 mark he let a little bit of inside information slip that we've been waiting for. According to DrFlick, the next version of the ATI Digital Cable Tuner's firmware-- the same one that is supposed to reduce the DRM -- will enable support for the Tuning Adapter (all though he actually called them by their old name, "Tuning Resolver") in Windows 7 Media Center. Once upon a time there was a little debate as to whether these devices would even work with OCURs, but now it seems that it just a matter of time.

New CableCARD diagnostic tool for Windows Media Center makes installation slightly less frustrating

Let's be honest, getting a CableCARD to work with Windows Media Center is far, far, far from a smooth process. Thankfully, the Media Center Integrator Alliance -- this sort of the things is its bag, naturally -- are set to show off a Digital Cable Tuner Diagnostics tool at next week's Electronic House Expo. It'll provide all kinds of information on your tuner and CableCARD, including modulation type, format, frequency, carrier, PCR Lock, encoding level, and authorization -- and if all that goes way over your head, there's an option to export the data to XML and send it to someone who can help. No word on when we'll see an official release, but no matter what, it won't be soon enough.

Ceton Corp announces multi-stream CableCARD tuner for Windows Media Center

Centon Corp Digital Cable TunerWatch out ATI, because you're exclusivity on digital cable tuners for Windows Media Center is about to run up. You see Ceton Corp announced that during 2009 their multi-channel digital cable tuner will ship, and for the first time ever a single device will somehow allow you to record up to six channels at once. We're not exactly sure how this is going to work, and we're kinda curious to know if a single PCI card will be able to do this all on its own, but regardless, competition is good. Of course the bad news is that you still can't build your own Windows Media Center and get this to work, but you knew that already didn't you?

[Via Chris Lanier]

Cannon PC starts offering internal CableCARD tuners for sale separately

internal ATI TV Wonder DCT
If you're like some people we know - - yes Zatz, we're talking about you -- the idea of adding yet another box to your home theater setup isn't anywhere near consideration. Up until now, this meant that if you wanted to add an ATI Digital Cable Tuner to your Vista Media Center PC, you either had to hold your nose or spend the big bucks on one of the top tier OEMs that offered the internal version -- which is actually the same device sans a case, and yes it still connects via USB. Our friend Chris Lanier discovered today that Cannon PC started selling both the external and internal versions of the ATI TV Wonder DCT separately, so that finally those with CableCARD ready Vista Media Center PCs -- you know the OEM only ones -- can either add additional tuner, or opt to swap out the external variety for the internal type the takes less space, all for about $300 each.

[Via The Digital Lifestyle]

HP offers up HD DVD / Blu-ray drives on select Pavilion desktops


Just last month, we heard rumblings that HP may begin offering up two-faced optical drives in its desktops, and sure enough, a variety of select Pavilions are now being served up with HD DVD and / or Blu-ray compatibility. The d4995t, m9000t and m9000z all give users the option of purchasing a vanilla dual-layer DVD burner, an HD DVD / Blu-ray combo player (that also burns DVDs), or a drive that burns Blu-ray / DVD and reads HD DVD. Additionally, a number of lesser-spec'd rigs also provide users the option of picking up an HD combo drive of some sort, and you can even snap up ATI's TV Wonder Digital Cable Tuner on the d4995t and m9000t (among others).

[Thanks, Ryan]

CableCARD-equipped Dell XPS 410 desktops now available

Yeah, so it's been a tick since we first got wind of Dell's master plan to equip the XPS 410 with CableCARD support, but it's good to see the wares finally available for purchase. Starting now, users interested in picking up a mid-range XPS desktop with single or dual ATI TV Wonder Digital Cable Tuners can select either option when configuring their machine. The cost? $236 per tuner, which ain't too bad in the grand scheme of things.

[Via MSMVPS]

HP's m8010y and d4890y desktops to sport HD combo drives, digital tuners

Just because HP has buried the Digital Entertainment Center doesn't mean that it's forgetting about the media-centric crowd, as the company's forthcoming m8010y and d4890y will offer up some fairly swank high-definition niceties. Aside from offering customers the option for an Intel Q6600 Core 2 Quad processor and NVIDIA's GeForce 8800 GTS graphics card, this duo will also include a mysterious dual-format combo drive to handle both BD and HD DVD responsibilities. While we can only assume that the GGW-H10N will be the drive of choice, both PCs will boast HD DVD / Blu-ray playback with burning abilities including on the latter, and as if that wasn't enough HD goodness crammed into a PC, moneyed consumers can also opt to have ATI's TV Wonder Digital Cable Tuner pre-installed as well. There's no word just yet surrounding pricing, exact configurations, or a launch timeframe, but word on the street suggests that the combo drive should be made available to the adoring public within "four to six weeks."




    AOL News

    Other Weblogs Inc. Network blogs you might be interested in: