Skip to Content

WoW Insider is getting ready for BlizzCon!
AOL Tech

Integrated Amplifier posts

Onkyo keeps the SACD fires burning

by Steven Kim posted Jul 27th 2009 at 3:51PM

Onkyo C-S5VL SACD player, A-5VL integrated amplifier
Sure, Blu-ray has its Dolby TrueHD and DTS-HD MA formats to satisfy the audiophiles, but Onkyo has apparently decided that there are still enough US audiophiles to warrant the release of gear previously labeled "Japan-only." With Wolfson DACs and a thermally regulated data clock circuit (you know, to tame those nasty jitters), the $599 C-S5VL SACD deck is ready to tackle your small but irreplaceable library of discs. Pair it up with the $699 A-5VL integrated amp and transport yourself back to a time when you didn't worry about specs -- 40-Watts across two channels, Burr-Brown DACs, and a low-noise preamplifier section should make for a killer small room/office system; and if you're anything close to mainstream, a small room or office is exactly where music listening has been pushed to. Grab the "sweet spot" chair and indulge!

Onkyo outs audio-centric components in Japan

by Steven Kim posted May 26th 2009 at 7:48PM

Onkyo HTX-11X HTIB system
Onkyo just loves to make new product announcements in batches, and the latest press volley is no exception. Planned for release next month in Japan are the 2.1-channel HTX-11X system, CR-D2LTD CD mini-system with matched D-112EXLTD bookshelf speakers, A-5VL Class D integrated amplifier, and C-S5VL thin SACD deck. Even if the model names don't exactly roll off the tongue, the machine translations tell you most of what you need to know. Here's a quick rundown: the HTX-11X matches up the stereo pair of bookshelf speakers with the amplifier buried in the subwoofer cabinet to the tune of 35-Watts to the sub itself and 17-Watts across each of the 5 remaining taps; if you're putting together something for your executive office, the CR-D2LTD mini-system paired up with the D-112EXLTD speakers will handle your CDs and FM radio; and audiophiles looking to roll their own might find something to like in the 80-mm thin C-S5VL SACD deck and 40-Watt A-5VL Class D integrated amplifier. If you're planning on doing some shopping in Akihabara soon, go past the break for pretty pics and hit the links for the full details.

Read - HTX-11X HTIB system
Read - CR-D2LTD mini-system, D-112EXLTD speakers
Read - A-5VL integrated amplifier, C-S5VL SACD player

Continue reading Onkyo outs audio-centric components in Japan

Marantz KI Pearl SACD player and integrated amp -- audiophile tested, Ken Ishiwata-approved

by Steven Kim posted May 9th 2009 at 7:22PM

Marantz KI Pearl SACD player and integrated amplifier
One reason we keep a place in our hearts for high-end audio is that there is still room for a single designer's vision, and this is no more apparent than in components with designer initials etched right into the faceplate. Right in line with NAD's stereo components wearing Bjorn Erik Edvardsen's initials, Marantz has issued the KI (Ken Ishiwata) Pearl stereo SACD player (model SA-KI) and matching integrated amplifier (model PM-KI). As with any signature gear, top-notch build is expected, and the Marantz KI Pearls don't disappoint; toroidal transformers, copper plated chassis and hand-picked components make the grade. Of course, you also expect high prices, and the KI Pearl pieces also deliver on that front -- the limited run of 500 pieces (each) of the SACD player and integrated amp will go for £2,499 ($3,769) each, and no US availability or pricing has been released yet. Painful, yes, but you might take some small comfort in knowing this is exactly the kind of gear that will appreciate in value. Audio geeks can go past the break for more glamor shots.

Continue reading Marantz KI Pearl SACD player and integrated amp -- audiophile tested, Ken Ishiwata-approved

Rotel's new 15-series components show stereo some love

by Steven Kim posted May 4th 2009 at 8:19PM

Rotel RC-1550 preamplifier
Not everyone has jumped into the multi-channel audio arms race, and the last time we checked, the majority of music was available in two-channel stereo format. Rotel has introduced a new set of 15-series components for just such stereo lovers. At the head of the stream is the RCD-1520 slot-loading CD player with a toroidal transformer and segmented power supply that promise not to gum up the Wolfson DACs with noise. The RC-1550 (pictured) and RC-1580 stereo preamplifiers do their level best (pun intended) to embody the "straight wire with gain" ideal; pair them up with the 2x200-Watt RB-1582 or the 2x120-Watt RB-1552 amplifier. Finally, if you're after all-in-one convenience -- or not into expensive interconnects -- there's the RA-1520 integrated amplifier that wraps a preamp and a 2x60-Watt amplifier in one tidy package. This is Rotel gear, so you know prices aren't cheap; but then again, if you're still chasing after stereo gear, you probably are used to that. Full details -- including an "Engadget-effect" macro shot -- after the break.

Continue reading Rotel's new 15-series components show stereo some love

Krell's S-300i integrated amplifier is iPod / iPhone-friendly

by Darren Murph posted Nov 19th 2008 at 8:32PM

Like it or not, the iPod has become a de facto standard for portable media, and it's only logical that even high-end audio manufacturers cater to the demands of the market. To that end, Krell Industries has baked in native iPod / iPhone support into its latest integrated amplifier, the S-300i. Said amp features a fully balanced, Class A preamplifier circuit with a stereo amplifier rated at 150-watts per channel into 8-ohms and 300-watts per channel into 4-ohms along with a 750 VA toroidal transformer and 38,000 microfarads of storage capacitance. The iPod / iPhone interface taps audio from the fully differential output included in the devices, and the bundled remote is made of solid aluminum. You'll also find three unbalanced RCA inputs, a balanced XLR input, a jack for the iPod / iPhone cable and WBT speaker cable terminals -- 'tis a shame it'll cost you $2,500, huh?

[Via CEPro]

Anthem chooses CEDIA to reveal 225 integrated amplifier

by Darren Murph posted Sep 5th 2008 at 8:56AM


Anthem may not have the presence of, say, Sony at CEDIA this year, but at least it isn't wasting all of our time by unveiling a $1,500 SACD player. Our apologies to any of you we just offended (yes, all two of you), but seriously, we have a feeling true audiophiles will appreciate the 225 integrated amplifier much more. Designed with music aficionados in mind, this amp provides a phono preamp input that supports Moving Coil (MC) and Moving Magnet (MM) applications and includes solid-state circuitry boards, seven total stereo audio inputs, a universal learning remote and an RS-232 port. The unit boasts 225-watts of pure, clean power per channel at 8-ohms, and while it will set you back $1,499, this $1.5k piece may actually be worth the price of entry.




    AOL News

    Other Weblogs Inc. Network blogs you might be interested in:

    Joystiq
    Download Squad
    The Unofficial Apple Weblog (TUAW)
    BloggingStocks
    Joystiq Xbox
    Autoblog
    Big Download
    Fanhouse NFL Blog