While Gefen tries to decide if it likes UWB or WHDI better, it's getting back to its bread and butter with the 1:5 Splitter for HDMI over CAT5. The rack-mountable unit allows any single HDMI source to be split and delivered to five displays simultaneously and can also extend four displays up to 45-meters over CAT5. At the aforesaid distance, 1080p content can be streamed, but if 1080i is sufficient, you can reach up to 90-meters. Unfortunately, these privileges don't come cheap, though it's available to pre-order this very moment if you've got the $2,249 to burn.

Sony's ES line of AV receivers has been growing for months now, but it was the CEDIA-announced STR-DA6400ES and STR-DA5400ES that we were most interested in. As predicted, these buggers were pretty beefy, but it's hard to gripe with all those ports around back. We thought the no-frills styling looked pretty sophisticated in person, and when we got real close, we could almost feel those seven channels of amplification just emanating. You know the drill -- peep the gallery below when you're good and ready.

At CEDIA, home install is king. Thus, it shouldn't come as any shock to see Sony introducing a few products not exactly aimed at the consumer crowd. Enter the NHS-A30C / NHS-70C home automation racks and the HomeShare multi-room entertainment solution, both of which were generating a bit of buzz while we were bobbing and weaving in an attempt to snag a few shots. The HomeShare system seemed particularly amazing, with the wall-mounted touch panels being among the most attractive at the show. Check out the full walk-through below.

While most of Sony's offerings thus far at CEDIA have catered to the general electronics consumer, this one is pointed directly at the custom install market. The new HomeShare HD multi-room entertainment solution delivers up to 16 zones of entertainment (four zones of HD video) to any room in the house via standard CAT5e wiring. The neatly packaged, um, package includes the HS-KP1 keypad (4.3-inch screen to display the XMB-based UI; pictured), the HS-MB1 distribution panel, HS-WV1 audio / video wallport, HS-AC1 power supply, HS-WA1 local audio wallport and the HS-WD1 digital media wallport for connecting an iPod (or similar). The kit will be available early next year through Sony's network of installation dealers, and pricing is expected to be between $1,000 and $2,000 per room. The whole release is after the jump.

Here lately, it's been the more prosumer / professional-focused brands kicking out the extenders and switches, but IOGEAR is returning to the fold by introducing two CAT5e / 6 MiniExtender Kits and a pair of HDMI switches to boot. As for the extenders, you'll find one for HDMI ($279.95) and one for DVI-D ($69.95); the former provides "an additional 100 feet between a 1080p display unit and media source or an extra 200 feet for 1080i display units," while the latter "extends a DVI PC source 100 feet away from a single link DVI-D display with resolution of 1920 x 1080 at 60Hz." Closing things out are the 3-Port HDMI Automatic Switch ($89.95) and the 4-Port HDMI Switch with Remote ($89.95), both of which are fairly self-explanatory. The whole lot is available as we speak.

If slinging HDMI signals over Ethernet sounds appealing to you, look no further than Octava's newest box. The HDMI over Ethernet extender enables users to transmit 1080p HDMI signals up to 150-feet over Ethernet (300-feet for 1080i), and while CAT6 is recommended, CAT5 should do the trick in a pinch. Of note, two Ethernet cables are necessary in order to carry audio / video as well as HDCP data, and both the receiver and transmitter are bundled with dedicated power supplies to ensure maximum performance. Expect the kit to ship next week for $199.

If you've been on the hunt for a multifaceted extender to handle just a bit more than HDMI, look no further. Gefen's HDMI RS-232 Extender is able to casually transmit HDMI, RS-232 control commands and IR signals up to 150-feet at 1080p (300-feet at 1080i) over standard CAT5 cabling. As expected, the device is HDCP-compliant, and it'll play nice with any IR unit you feel like attaching. Unfortunately, such convenience demands a serious premium, as this five-pound box will erode your savings account by $599.

Not like you really needed another option when selecting a HDMI 1.3 extender, but Apogee's giving you just that, anyway. The firm's new HDMI 1.3 CAT5e / CAT6 Extenders enable users to stretch 1080p signals up to 60 meters and 1080i signals up to 120 meters, and if you're serving up 480p / 720p, you can string those over 200 feet without degradation. Additionally, it's backwards compatible with older HDMI versions (and DVI, too), and it appears to function with CAT5e or CAT6 cabling. You can get yours this very moment for $109.99.

Shortly after dishing out a v1.3-compliant 1:10 HDMI distribution amplifier and 1:5 HDMI splitter, Gefen is hitting us up with two new signal pushers for the component lovers in the house. The 1:4 Component/Audio CAT-5 Distribution Amplifier and the 1:8 Component/Audio CAT-5 Distribution Amplifier each enable component video to be delivered to a multitude of displays (four for the first, eight for the second); additionally, each box is equipped with RCA, S/PDIF and Toslink optical audio jacks. The duo promises to carry both audio and 1080p video signals over CAT5 cables to displays some 1,000 feet away, and while they'll run you $799 and $1,499, respectively, receivers are sold separately at $200 a pop.

The same folks bringing you a colorful line of HDMI cables are also doling out a new set of HDCP-compliant HDMI extenders. Up first is the VP3OT001200, which enables 1080p signals to be carried an additional 30 meters over CAT5, promising signaling rates up to 2.2Gbits / second. If 30 meters won't quite cut it, the VP3OT001300 enables transmissions to go an additional 20 meters by utilizing CAT6 cabling instead. Both choices come with a power supply, sender and receiver module and can be snapped up now for $59 and $71, respectively.

Read - 30 meter VP3OT001200 HDMI extender
Read - 50 meter VP3OT001300 HDMI extender

We've griped about HDMI before, but it's not a standard that's going to go away anytime soon and it does make for a convenient, all-in-one A/V connection. But non-captive plugs aside, cable lengths beyond about 50-feet are a dicey proposition without resorting to extra hardware. Enter Honeywell's new HDMI-to-CAT5 baluns, which enable you to distribute your HDMI whole-house stye in a package that's more decor-friendly than other solutions. The single gang wall plate style devices allow you to pipe 1080p signals up to 125-feet over CAT5 cable, and 200-feet if you've pulled CAT6 through the walls. The baluns have Honeywell's CURxE "self-healing" technology, so corrupted EDID or HDCP data is restored at the receiving end and troubleshooting of other signal issues is available. If you're building a new home or pulling new wires through old walls, look for these in mid-December (hey, that's now -- start looking!).

Meridian announced the successor to their DSP7000 speakers, the DSP7200. Meridian has always been happy to forge their own path in coming up with technical solutions for digital audio, and the DSP7200 is no exception. These are digital active speakers, meaning a digital bitstream is fed to the speakers and D/A conversion and amplification tasks are handled internally. There are real-world advantages to this approach -- vastly simplified cabling (both audio signal and control signals are passed around via standard daisy-chained CAT5), signals are kept in the digital domain as long as possible, and all processing can be done in the digital realm. The downside is the whole-system approach you have to commit to, which discourages mix and match. Membership in the Meridian club at this level isn't cheap, either. Pricing for the new DSP7200 was not announced, but the DSP7000 speakers being replaced cost about $25000 per pair. Ouch. We'll keep moving down the aisle to some of their other offerings.

If you're inclined to go big and multi-room with audio and video, Sony has unveiled some distribution products for you at the Pacific Coast Builders Conference, with two sets of high-definition video distribution products -- one for new construction, and one using existing Cat5 cabling. The NHS-3040 rack system is for new homes, and combines various Sony products for a whole-house distribution network: a home theater, XM Radio tuner, Blu-ray player, 400-disc DVD changer, and 80GB music storage and management server, along with support for 13 different audio/video zones. The NHS-2040 model drops you down to six zones, while the NHS-1040 removes the changer as well. For existing wiring, Sony offers up the CAV-CVS12ES HD switching system, which uses a single Cat5e per zone to route your video into up to 12 zones, and supports eight 1080p-capable component inputs. The system supports IR and RS-232 control, and pairs up with Sony's CAV-M1000 line of audio distro systems. As long as you're wiring up your house anyway, why not throw in Sony's WS-ADP4 doorbell intercom adapter with electronic door release, so you don't have to bother the butler to open the door for you while you're both in the third-floor bedroom watching Desperate Housewives in HD.

Read - Sony NHS series distro system
Read - Sony CAV-CVS12ES Cat5e system
Read - WS-ADP4 doorbell intercom

In today's home theaters, no one want to have all their fancy equipment sitting on top of their shiny new HDTVs, and yesterday's technology can't help much when it comes to distributing HD signals around the house.

Transferring HD material throughout the house or even to another room just got a little easier with Gefen's new Component Extender. The extender uses CAT5 to extend your VGA or component signals up to 300 feet and handles 1080p transmissions. It has VGA ports on the box but includes the VGA to component adapter. I could have used one of these in my setup, but instead I used 3 coax runs which are a little harder to run than a single CAT5 cable. On the other hand 3 coax runs doesn't cost $300 like Gefen's new device.